MIL-DTL-24558B
4.5.6 Shock. Equipment shall be tested in accordance with the high-impact shock test
for grade A, class I, type C of MIL-S-901. Performance requirements shall be as specified in
5. PACKAGING
5.1 Packaging. For acquisition purposes, the packaging requirements shall be as
specified in the contract or order (see 6.2). When packaging of materiel is to be performed by
DoD or in-house contractor personnel, these personnel need to contact the responsible packaging
activity to ascertain packaging requirements. Packaging requirements are maintained by the
Inventory Control Point's packaging activities within the Military Service or Defense Agency, or
within the military service's system commands. Packaging data retrieval is available from the
managing Military Department's or Defense Agency's automated packaging files, CD-ROM
products, or by contacting the responsible packaging activity.
6. NOTES
(This section contains information of a general or explanatory nature that may be helpful,
but is not mandatory.)
6.1 Intended use. The terminal connection boxes covered by this specification are
intended for use in electrical and electronic systems primarily on naval ships.
6.2 Acquisition requirements. Acquisition documents should specify the following:
a. Title, number, and date of this specification.
b. Symbol number of terminal connection box required and title, number, and date of
the applicable specification sheet (see 1.2).
d. Priming or painting of the enclosure exterior, if required (see 3.4.3.5).
e. Alternate white powder coating finish, if required (see 3.4.3.6).
f. Type of mounting bracket, if different (see 3.4.4.1).
g. Alternate mounting bracket, if required (see 3.4.4.2).
h. Type of information plate required, if other than specified (see 3.5.2).
i. Inspection test conditions, if other than specified (see 4.2).
j. AQL (see 4.4.2 and 4.4.2.1).
k. Packaging requirements (see 5.1).
6.3 First article inspection. Invitations for bid should provide that the government
reserves the right to waive the requirement for first article samples and test report results for first
article inspection for those bidders offering a product that has been previously acquired or tested
by the government, and that bidders offering such products who wish to rely on such production
or test, must furnish evidence with the bid that prior government approval is appropriate for the
pending contract.
11
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business