INCH-POUND
MIL-DTL-24558B
3 October 2011
SUPERSEDING
MIL-DTL-24558A
17 February 2006
DETAIL SPECIFICATION
TERMINAL BOXES, CONNECTION, FOR ELECTRICAL AND ELECTRONIC SYSTEMS,
GENERAL SPECIFICATION FOR
This specification is approved for use by all Departments and Agencies of the
Department of Defense.
1. SCOPE
1.1 Scope. This specification covers the general requirements for terminal connection
boxes for electrical and electronic systems.
1.2 Classification. The terminal connection boxes are of the symbol numbers specified
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all specified
requirements of the documents cited in sections 3 and 4 of this specification, whether or not they are
listed.
Comments, suggestions, or questions on this document should be addressed to DLA Aviation
VEB, 8000 Jefferson Davis Highway, Richmond, VA 23297-5616, or e-mailed to
STDZNMGT@dla.mil. Since contact information can change, you may want to verify the
currency of this address information using the ASSIST database at https://assist.daps.dla.mil/.
AMSC N/A
FSC 5940
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business