INCH-POUND
MIL-DTL-24558/22B
3 October 2011
SUPERSEDING
MIL-DTL-24558/22A
w/AMENDMENT 1
17 February 2006
DETAIL SPECIFICATION SHEET
TERMINAL BOXES, CONNECTION, SUBMERSIBLE (15-FOOT), 500 VOLTS,
SINGLE-PHASE, SYMBOL NO. 415 - TWO 75 MCM CABLES, SYMBOL NO. 415.1 - TWO
100 MCM CABLES, SYMBOL NO. 415.2 - TWO 125 MCM CABLES, SYMBOL NO. 415.3 -
TWO 150 MCM CABLES AND SYMBOL NO. 415.4 - TWO 200 MCM CABLES
This specification is approved for use by all Departments and Agencies of the Department of
Defense.
The requirements for acquiring the products described herein shall consist of this specification
sheet and MIL-DTL-24558, "Terminal Boxes, Connection, for Electrical and Electronic
Systems, General Specification for".
REQUIREMENTS: The terminal boxes shall be as specified herein and in accordance with
1. Electrical rating. The terminal boxes shall have an electrical rating of 500 volts root
mean square, and 500 volts direct current. The maximum current shall not exceed 350 amperes
per terminal lug.
2. Dimensions and configuration. For dimensions and configuration see figures 1
terminal box dimensions are approximate. Exact dimensions are shown in MIL-E-24142/6,
"Enclosure, Submersible (15-Foot), Sizes 8 by 10 Through 14 by 26".
3. Tolerance. All tolerances not specified herein shall be in accordance with
MIL-DTL-24558.
4. Standard parts. The standard parts shown in table I shall be used in the construction
are the same as those shown in the "Item" column of table I.
AMSC N/A
FSC 5940
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business