INCH-POUND
MIL-DTL-24552B(SH)
8 June 2001
SUPERSEDING
MIL-T-24552A(SH)
3 November 1986
DETAIL SPECIFICATION
TERMINALS AND SEALS, PLUGS AND SWITCH,
CASUALTY POWER SYSTEMS, RECEPTACLE TYPE,
GENERAL SPECIFICATION FOR
This specification is approved for use by the Naval Sea Systems
Command, Department of the Navy, and is available for use by all
Departments and Agencies of the Department of Defense.
1.
SCOPE
1.1 Scope. This specification covers terminals and seals, seals,
plugs, and switches that provide emergency electric power connections for
casualty power systems. The capacity of these devices is 450-volt alternating
current (Vac), 3-phase, 100- and 200-ampere for use on Naval ships, and other
characteristics as specified (see 6.2).
2.
APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in
sections 3 and 4 of this specification. This section does not included
documents cited in other sections of this specification or recommended for
additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they
must meet all specified requirements documents cited in sections 3 and 4 of
this specification, whether or not they are listed.
2.2
Government documents.
2.2.1 Specifications, standards, and handbooks. The following
specifications, standards, and handbooks form a part of this document to the
extent specified herein. Unless otherwise specified, the issues of these
documents are those listed in the issue of the Department of Defense Index of
Specifications and Standards (DoDISS) and supplement thereto, cited in the
solicitation (see 6.2).
SPECIFICATIONS
FEDERAL
QQ-B-654
- Brazing Alloys, Silver.
QQ-S-365
- Silver Plating, Electrodeposited, General
Requirements for.
Beneficial comments (recommendations, additions, deletions) and any pertinent
data which may be of use in improving this document should be addressed to:
Commander, SEA 05Q, Naval Sea Systems Command, 1333 Isaac Hull Ave SE,
Washington Navy Yard, Washington D.C. 20376, by using the Standardization
Document Improvement Proposal (DD form 1426) appearing at the end of this
document or by letter.
AMSC N/A
FSC 5940
DISTRIBUTION STATEMENT A.
Approved for public release; distribution is
unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business