INCH-POUND
A-A-52425B
September 12, 2013
SUPERSEDING
A-A-52425A
July 29, 1996
COMMERCIAL ITEM DESCRIPTION
ADAPTER, BATTERY TERMINAL
The General Services Administration has authorized the use of this Commercial Item
Description (CID) for all federal agencies.
1. SCOPE. This CID covers terminal adapters for mounting and fastening positive or negative
electrical lead to tapered battery terminals utilizing the nuts and bolts provided within the
terminal adapter (see figure 1).
2. CLASSIFICATION. Terminal adapters shall be of the following types:
Type I
-
Positive
Type II
-
Negative
3. SALIENT CHARACTERISTICS
3.1 Materials. The battery terminal adapter shall be made of material selected by the
manufacturer and shall be subject to all provisions of this CID.
3.1.1 Body. The body of the terminal adapter shall be made from a lead-antimony alloy having
4 to 7-1/2 percent (%) antimony, not more than 1% materials which are neither lead nor
antimony, and the remainder lead.
Comments, suggestions, or questions on this document should be addressed to
U.S. Army RDECOM, Tank Automotive Research, Development and Engineering Center,
ATTN: RDTA-EN/STND/TRANS MS #268, 6501 E. 11 Mile Road, Warren, MI 48397-5000
or emailed to usarmy.detroit.rdecom.mbx.tardec-standardization@mail.mil. Since contact
information can change, you may want to verify the currency of this address information using
the ASSIST Online database at https://assist.dla.mil.
AMSC N/A
FSC 5940
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business