MS51536C
TABLE I. Dash numbers and dimensions.
Dash no. |
Wire size AWG1 nominal |
Stud size |
A |
B |
C |
|
Min. |
Max. |
|||||
1 |
12 |
2 |
0.090 |
0.096 |
0.094 |
0.312 |
2 |
4 |
0.115 |
0.127 |
|||
3 |
6 |
0.141 |
0.153 |
|||
4 |
8 |
0.167 |
0.179 |
|||
5 |
10 |
0.193 |
0.205 |
|||
1American Wire Gauge.
REQUIREMENTS:
1. Material: Electrolytic copper strip or sheet alloy C11000, temper O60 in accordance with ASTM B 152/B 152 M (DoD adopted).
2. Finish: Tinned; electrodeposited over entire surface in accordance with ASTM B 545 (DoD adopted). Minimum thickness 0.0005.
NOTES:
1. Dimensions are in inches.
2. Unless otherwise specified, tolerance is ±0.015.
3. Remove all burrs.
4. Referenced documents of issue in effect on date of invitation for bids shall apply.
5. In the event of a conflict between the text of this document and the references cited herein, the text of this document shall take precedence.
6. The part or identifying number (PIN) consists of the letters MS, the specification sheet number, and a dash number taken from table I.
MS 51536 - 1
Dash number
Specification sheet number
MS prefix
CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business