MS35430C
D
C
A
F B
H
E
FIGURE 5. Terminal dimensions for -24 through -26.
TABLE IV. Dash numbers and dimensions for -24 through -26.
|
Dash no. |
wire size AWG1 nominal |
Stud size |
A |
B |
C |
D |
E |
F |
H ±0.003 |
|
Min. |
Max. |
|||||||||
24 |
10 |
4 |
0.115 |
0.127 |
1/8 |
9/32 |
1 1/8 |
3/16 |
53/64 |
0.032 |
25 |
10 |
0.193 |
0.205 |
3/8 |
13/16 |
15/32 |
||||
26 |
1 1/8 |
13/16 |
||||||||
1American Wire Gauge.
REQUIREMENTS:
1. Material: Electrolytic copper strip or sheet alloy C11000, temper 060 in accordance with ASTM B 152/B 152M (DoD adopted).
2. Finish: Tinned; electrodeposited over entire surface in accordance with ASTM B 545 (DoD adopted). Minimum thickness 0.0005 inches all over.
N0TES:
1. Dimensions are in inches.
2. Unless otherwise specified, tolerance is ±1/64.
3. Remove all burrs.
4. Figure 2 optional wire grip design is for -1 through -13 and -27 only.
5. Referenced documents of issue in effect on date of invitation for bids shall apply.
6. In the event of a conflict between the text of this document and the references cited herein, the text of this document shall take preference.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business