A-A-52425B
3.1.3 Bolts and nuts. The bolts and nuts used for clamping to the battery terminal post and for the mounting of leads shall be made of steel SAE Grade I, as specified in SAE J429, equivalent or better and plated with tin-zinc or lead.
3.2 Design and construction. The terminal adapters shall be constructed with a die cast body having a steel insert for reinforcing the core and provisions for a bolt and a nut for clamping to the battery post and a bolt and nut for mounting the leads. The insert shall be imbedded in and completely covered by the body alloy so that no voids expose the insert on the external surface of the adapter. All dimensions shall be in accordance with figure 1.
3.3 Assembly. Completed terminal adapters shall have bolts and nuts assembled in place (see figure 1).
3.4 Terminal identification. The letter “P” and/or “+” for type I, or the letter “N” and/or “-“ for type II shall be cast, engraved or stamped on the top face of each terminal adapter for identification of positive or negative terminals as applicable (see figure 1).
3.5 Identification and marking. Identification and marking of the terminal adapters, as a minimum, shall include the part identification number (PIN), manufacturer’s CAGE code, and part number.
3.6 Workmanship. The workmanship shall be such as to ensure a product free of sharp edges. The insert shall be completely covered by the lead alloy and die cast body shall be free of all voids or pits caused by molding faults, which would affect serviceability.
4. REGULATORY REQUIREMENTS. The offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR).
5. PRODUCT CONFORMANCE PROVISIONS
5.1 Product conformance. The products provided shall meet the salient characteristics of this commercial item description, conform to the producer’s own drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance.
6. PACKAGING. Preservation, packing, and marking shall be as specified in the contract or order (see 7.2).
7. NOTES
(This section contains information of a general or explanatory nature that may be helpful, but is not mandatory.)
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business