[INCH-POUND]
A-A-52416
December 7, 1992
COMMERCIAL ITEM DESCRIPTION
TERMINALS, LUG; AND SPLICES, CONDUCTOR
(ELECTRICAL, SOLDERLESS, FOR AUTOMOTIVE USE)
The General Service Administration has authorized the use of this commercial item description (CID) as a replacement for MIL-T-13513B (AT), which is canceled.
1.0 Abstract. This commercial item description (CID) covers crimp-type solderless, electrical, lug terminals and splices for use with insulated electrical conductors (cables) for automotive vehicles.
1.1 Classification. Terminals and splices shall be of the following types, as specified (see 5.2):
Type I – Terminals, Nonwatersealed type.
Type II – Terminals, Watersealed type.
Type III – Splices, Nonwatersealed.
2.0 Salient characteristics.
2.1 Materials. Materials shall be as specified herein and in applicable drawings. Materials shall be free from defects which adversely affect performance or serviceability of the finished product. The use of recovered material made in compliance with regulatory requirements is acceptable providing that all requirements of this CID are met (see 5.5).
2.1.1 Type I and III. Type I terminals and type III splices shall be fabricated of copper or aluminum bronze conforming to ASTM B133, B272.
2.1.2 Type II. Type II terminals (watersealed type) shall be fabricated of materials as specified in Drawing 7056700.
2.2 Design and construction.
2.2.1 Type I and III. Type I terminals and type III splices shall be constructed as specified herein and in accordance with applicable drawings.
|
Beneficial comments, recommendations, additions, deletions, clarifications, etc. and any other data which may improve this document should be sent by letter to: U.S. Army Tank-Automotive Command, ATTN: AMSTA-GDS, Warren, MI 48397-5000. |
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business