MIL-DTL-24558-2 Terminal Box, Connection, Submersible \(15-Foot\), 8-Terminal, 32-Wire, 600 Volts, Symbol No. 435.1

Pages 1 - 2 - 3 - 4 - 5

INCH-POUND

MIL-DTL-24558/2B

3 October 2011

SUPERSEDING

MIL-DTL-24558/2A

w/AMENDMENT 1

17 February 2006

DETAIL SPECIFICATION SHEET

TERMINAL BOX, CONNECTION, SUBMERSIBLE (15-FOOT), 8-TERMINAL,

32-WIRE, 600 VOLTS, SYMBOL NO. 435.1

This specification is approved for use by all Departments and Agencies of the Department of

Defense.

The requirements for acquiring the product described herein shall consist of this specification

sheet and MIL-DTL-24558, "Terminal Boxes, Connection, for Electrical and Electronic

Systems, General Specification for".

REQUIREMENTS: The terminal box shall be as specified herein and in accordance with table I

and figures 1 through 3.

1. Electrical rating. The terminal box shall have an electrical rating of 600 volts root

mean square, and 600 volts direct current. The maximum current shall not exceed 40 amperes

per stud of terminal board.

2. Dimensions and configuration. For dimensions and configuration see figures 1

through 3. All dimensions in figures 1 through 3 are expressed in decimal inches. Overall

terminal box dimensions are approximate. Exact dimensions are shown in MIL-E-24142/5,

"Enclosure for Electrical Fittings and Fixtures, Submersible, (15-Foot), Sizes 3R, 4R and 5R".

3. Tolerance. All tolerances not specified herein shall be in accordance with

MIL-DTL-24558.

4. Standard parts. The standard parts shown in table I shall be used in the construction

of the connection box specified herein. The numbers in circles shown on figures 1 and 2 are the

same as those shown in the "Item" column of table I.

5. Enclosure. The enclosure shall be a 15-foot submersible type.

AMSC N/A

FSC 5940